Dry type transformer price is how much, what is the standard?
Release time:
2023-01-18
Difference between SCB type dry-type transformer and SGB type transformer At the level of coil inductance electromagnetic coil: the low-voltage electromagnetic coil of SCB type dry-type transformer is foil wound. Winding structure: select copper single-sided winding, solid layer raw material with latent epoxy curing agent of epoxy resin adhesive and subordinate composite foil. Winding raw material: wire with good conductivity and copper content of 99.99. The low voltage electromagnetic coil of SGB dry type transformer is wound by wire. Winding structure: barrel type electromagnetic coil, a number of general glass fiber wire coated flat copper wire.
Difference between SCB type dry-type transformer and SGB type transformer
At the level of coil inductance electromagnetic coil: the low-voltage electromagnetic coil of SCB type dry-type transformer is foil wound. Winding structure: select copper single-sided winding, solid layer raw material with latent epoxy curing agent of epoxy resin adhesive and subordinate composite foil. Winding raw material: wire with good conductivity and copper content of 99.99. The low voltage electromagnetic coil of SGB dry type transformer is wound by wire. Winding structure: barrel type electromagnetic coil, a number of general glass fiber wire coated flat copper wire.
SGB type dry-type transformer anti-short-circuit ability is stronger than SCB type dry-type transformer.
In the field of heat conduction, SCB type dry-type transformers are better than SGB type transformers.
At the level of load loss, SCB type dry transformer is less than SGB type dry transformer.
In terms of temperature, the SCB type is better than the dry SGB type.
7. Price comparison of SGB, SCB and S13 dry-type transformers
Taking the short-circuit capacity of 1250KVA power transformer as an example, the prices of manufacturers of similar products are searched on the Internet for comparison.
SGB11---1250KVA/10KV/0.4KV, SCB11-1250KVA/10KV/0.4KV, S13-1250KVA/10KV/0.4KV power transformers. Previously, the prices of a factory were 93800 yuan/set, 95600 yuan/set 59600 yuan/set respectively. Since then, it can be seen that the price of SCB type and SGB type is not much different, and the price of dry-type transformer is more than 1.5 times that of oil-immersed transformer. dry type transformer price concessions.
Code for adoption of power transformers
When using transformers, refer to GB/T17468---2008 "Guidelines for Selection of Power Transformers" and GB4208----2008 "Enclosure Protection Level (IP Code)", and adopt power transformers suitable for site environmental conditions.
General standards for power transformers: When using transformer performance parameters, the stability of the transformer as a whole should be taken as the carrier, the superiority and rationalization and rationality of the performance parameters should be fully considered, the operation mode should be integrated, and the investment estimate should be clearly put forward. At the same time, it is also necessary to take into account the hazards that may be caused to the optimal operation of the system, environmental protection, material saving, transportation and installation of indoor space.
The main reason for the noise of dry-type transformers, while providing the use of single-oriented high-permeability silicon steel sheet, reduce the core rated working magnetic density of two ways to reduce the noise formed by dry-type transformers, control noise pollution. And due to the irregular expansion and contraction of the silicon steel sheet, it will also affect the surrounding silicon steel sheet. The noise generated by magnetostriction will increase the lateral amplitude of the silicon steel sheet, resulting in high-frequency noise, which has become the main factor affecting the noise of the dry-type transformer. One of the factors also determines the size of the noise of the dry-type transformer to a certain extent.
Key words:
Mobile Website
Sales Hotline
+86 13852525108
Contact: Mr. Zhan
Telephone: +86-514-85811000
E-mail: xxdq@jsxxdq.com
Address: No. 6-6 Kangmin Road, Yizheng City, Yangzhou City, Jiangsu Province