News

Jiangsu Xinxin Electric Co., Ltd.

Introduction of price and advantages of dry-type transformer


Release time:

2023-02-06

Dry-type transformers are widely used in local lighting, high-rise buildings, airports, docks, CNC machinery and equipment and other places. Simply put, it refers to a transformer in which the core and windings are not immersed in insulating oil. below, xiaobian introduce dry type transformer price and advantages. There are two cooling methods: natural air cooling and forced air cooling. When natural air cooling, the transformer can operate continuously for a long time under the rated capacity.

Dry-type transformers are widely used in local lighting, high-rise buildings, airports, docks, CNC machinery and equipment and other places. Simply put, it refers to a transformer in which the core and windings are not immersed in insulating oil. below, xiaobian introduce dry type transformer price and advantages.

There are two cooling methods: natural air cooling and forced air cooling. When natural air cooling, the transformer can operate continuously for a long time under the rated capacity.

Advantages:

Because it has the advantages of strong short-circuit resistance, small maintenance workload, high operating efficiency, small machine size, low noise, etc., it is generally used in places with high performance requirements such as fire prevention.

1, the use of safe, fire, to avoid pollution, can be directly with load operation;

2. Using domestic advanced technology, it has high mechanical strength, strong short-circuit resistance, small partial discharge, good thermal stability, high reliability and long service life;

3, low loss, low noise, energy saving effect is obvious, no need for regular maintenance;

4. Strong heat dissipation function, strong overload capacity, and increased operating capacity when forced air cooling;

5, good moisture-proof performance, can work in harsh environments such as high humidity;

6. It can be equipped with perfect temperature detection and protection system. Adopt intelligent signal temperature control system, automatically detect and display the working temperature of the three-phase winding, and can automatically start and stop the fan, and have alarm, trip and other functions;

7. The volume is relatively small, the weight is relatively light, the space is small, and the installation cost is not high.

What is the price of dry-type transformer? In the application process, it is inevitable that there will be problems such as failures. Therefore, for dry-type transformers, the basic and improved methods of protection and maintenance are also constantly being carried out. For general protection, the basic process of protection and maintenance needs to be continuously improved, and maintenance is necessary. So what are the basic methods of protection and maintenance?

During maintenance, check whether the equipotential connection is in good condition and whether the wire connector is corroded, and remove and replace it frequently; tighten the lead connector, pin, equipotential connecting screw and connecting busbar screw. Remove the dust around the accessories, and check whether the fire fighting equipment and exhaust system are of good quality.

Is there any problem with the cooling fan and the thermostat? Disconnect the equipotential connection knob on the high voltage side, lock the throttle of the high voltage switch, and measure the insulation resistance with a 2500V vibrator. Compared with the measured value, the insulation resistance should not be less than 70% of the original factory record. If it does not meet the requirements, it should be reported first, and the equipotential connection knob on the high-voltage side should be closed again to charge the dry-type transformer battery. No props left, welder will explain dry-type transformer protection test run in detail.

Dry-type transformer maintenance needs to clean the dust around the transformer and accessories, check the fire facilities and ventilation system is in good condition. Check transformer room and transformer for remaining tools and evacuate from site. Detailed maintenance and commissioning records.



Key words:



Business License