News

Jiangsu Xinxin Electric Co., Ltd.

Introduce the performance of oil immersed transformer


Release time:

2021-11-16

The low-voltage winding of oil-immersed transformer generally adopts a cylindrical structure with copper foil wound around the shaft except copper wire for small capacity. The high-voltage winding adopts a multi-layer cylindrical structure to make the ampere-turn distribution of the winding balanced, with small magnetic leakage, high mechanical strength and strong short-circuit resistance. The iron core and winding respectively adopt fastening methods. The fastening parts such as the height of the device and the low-voltage lead are all equipped with self-locking nuts, and the non-hanging structure, can withstand the jolt of transport.

The low-voltage winding of oil-immersed transformer generally adopts a cylindrical structure with copper foil wound around the shaft except copper wire for small capacity. The high-voltage winding adopts a multi-layer cylindrical structure to make the ampere-turn distribution of the winding balanced, with small magnetic leakage, high mechanical strength and strong short-circuit resistance. The iron core and winding respectively adopt fastening methods. The fastening parts such as the height of the device and the low-voltage lead are all equipped with self-locking nuts, and the non-hanging structure, can withstand the jolt of transport.

 

Coil and iron core selection of vacuum drying, transformer oil selection of vacuum filtration and oil injection process, so that the moisture inside the transformer to low. The oil tank uses corrugated sheets, which has a breathing function to compensate for changes in the volume of the oil caused by changes in temperature, so the product does not have an oil conservator, which significantly reduces the height of the transformer.

Because the corrugated sheet replaces the oil storage cabinet, the transformer oil is blocked from the outside world, thus effectively avoiding the entry of oxygen and water, which leads to the decline of insulation function. According to the above five functions, it is ensured that the oil-immersed transformer does not need to change oil during normal operation, which greatly reduces the maintenance cost of the transformer and prolongs the service life of the transformer.

When there are a large number of primary or secondary loads, two or more transformers should be installed. When any one of the transformers is disconnected, the capacity of other transformers can satisfy the power consumption of primary and secondary loads. 1. secondary load will be concentrated as much as possible, and should not be too lax. When the seasonal load capacity is large, special transformers should be installed. Such as large civil buildings in the air conditioning freezer load, heating electric heat load.

Key words:



Business License