Analysis of dry-type transformer capacity
Release time:
2022-03-22
There are many types of dry-type transformers, and different types of dry-type transformers with different fields of use, different characteristics, and different capacities. Then I will explain the selection skills of dry-type transformer capacity for everyone. First, it is necessary to carry out research on the power supply voltage of the specific power consumption site.
There are many types of dry-type transformers, and different types of dry-type transformers with different fields of use, different characteristics, and different capacities. Then I will explain the selection skills of dry-type transformer capacity for everyone. First, it is necessary to carry out research on the power supply voltage of the specific power consumption site.

Comprehensive customer's specific electricity consumption and the specifications of the region, and then refer to the technical data information marked on the factory nameplate of the transformer to select one by one. Generally, transformer capacity, operating voltage, current flow and natural environment specifications should be considered comprehensively. During the volume selection, the required load should be defined according to the volume, characteristics and service time of the customer's electricity consumption machinery and equipment. Therefore, the dry transformer volume should be selected.
Second, in the whole process of normal operation of dry-type transformers, the power consumption of dry-type transformers should be about 75-90% of the short-circuit capacity of dry-type transformers. When the specific load of dry-type transformers is measured to be less than 50% during operation, small-volume transformers should be disassembled and replaced, assuming that the short-circuit capacity of dry-type transformers is lower than that of transformers, large transformers should be disassembled and replaced immediately.
Naturally, the route switching power supply determines the operating voltage value of the primary coil of the dry-type transformer, and selects the operating voltage value of the secondary coil according to the power consumption machinery and equipment, preferably selecting the bottom voltage three-phase four-wire power supply system. In that way, the power consumption for driving force and general lighting can be shown separately. The above content is the selection method of dry-type transformer capacity. It can be said that the selection of dry-type transformer capacity should be carried out as comprehensively as possible. Only in that way can we ensure the selection of transformer products that can consider specific requirements.
Key words:
Mobile Website
Sales Hotline
+86 13852525108
Contact: Mr. Zhan
Telephone: +86-514-85811000
E-mail: xxdq@jsxxdq.com
Address: No. 6-6 Kangmin Road, Yizheng City, Yangzhou City, Jiangsu Province