News

Jiangsu Xinxin Electric Co., Ltd.

Learn how to use oil-immersed transformers


Release time:

2022-06-09

Although the volume of oil immersed transformer is large, but the operation cost is low, the latter part of the protection is simple, good heat dissipation, overload capacity is strong, can be used in different fields, such as electric power, metallurgy, petrochemical, building materials, machinery, mining, coal, ports, textile, civil aviation and other professional power system. Although oil-immersed transformers can be adapted to different environments, it is necessary to do a good job of fire prevention. Therefore, in the device, the use of oil-immersed transformer is still to pay attention to many details of the problem.

Although the volume of oil immersed transformer is large, but the operation cost is low, the latter part of the protection is simple, good heat dissipation, overload capacity is strong, can be used in different fields, such as electric power, metallurgy, petrochemical, building materials, machinery, mining, coal, ports, textile, civil aviation and other professional power system. Although oil-immersed transformers can be adapted to different environments, it is necessary to do a good job of fire prevention. Therefore, in the device, the use of oil-immersed transformer is still to pay attention to many details of the problem.

 

Under normal circumstances, when purchasing and mounting oil-immersed transformers, whether the oil-immersed transformers are to be mounted indoors or in the wild, their altitude shall not exceed 1000 meters, the temperature shall not exceed 40 degrees Celsius, and the daily average temperature shall be controlled at about 30 degrees Celsius. the annual average temperature is 20 to -25 degrees Celsius.

When the oil-immersed transformer is in normal operation, if the oil quantity is more than 2500kg, the fire prevention distance between the oil-filled electrical equipment with oil quantity of 600kg-2500kg shall not be less than 5 m. If the fire distance between two adjacent oil-immersed transformers does not meet the requirements of the device, it is also necessary to set up a firewall or fire water curtain on the top of the fire partition. For single-phase oil-immersed pressure transformer equipment, only fireproof partition wall or fireproof water curtain can be set up.

When the oil-immersed transformer is installed in the plant, the interval between the outer edge of the transformer and the outer wall shall not be less than 0.8 m, and the outer wall shall be equipped with firewall. When the distance between the outer wall of the factory building and the outer edge of the oil-immersed transformer is within 5 meters, do not open doors, windows and holes below the horizontal line of the total thickness of the transformer plus 3m and within the range of 3m on the outer edges of both sides. The fire limit of doors and fixed windows on firewalls outside its scope should not be less than 0.9h.

Key words:



Business License