undefined
+
  • undefined

Fully sealed oil-immersed amorphous alloy transformer

The main difference between oil-immersed transformers and dry-type transformers is the presence or absence of "oil." Because oil is a liquid and has fluidity, oil-immersed transformers *must* have an outer shell. The shell contains aviation hydraulic oil, in which the transformer's electromagnetic coils are immersed. The electromagnetic coils are not visible from the outside. Dry-type transformers, on the other hand, do not use oil or a shell, and the electromagnetic coils are directly visible. One characteristic is that oil-immersed transformers have an oil conservator that stores aviation hydraulic oil, but now there are also new three-phase oil-immersed transformers that are manufactured without an oil conservator.
The main difference between oil-immersed transformers and dry-type transformers is the presence or absence of "oil." Because oil is a liquid and has fluidity, oil-immersed transformers *must* have an outer shell. The shell contains aviation hydraulic oil, in which the transformer's electromagnetic coils are immersed. The electromagnetic coils are not visible from the outside. Dry-type transformers, on the other hand, do not use oil or a shell, and the electromagnetic coils are directly visible. One characteristic is that oil-immersed transformers have an oil conservator that stores aviation hydraulic oil, but now there are also new three-phase oil-immersed transformers that are manufactured without an oil conservator.

Key words:

Oil-immersed power transformers, dry-type transformers, combined transformers, prefabricated substations

Service Hotline:

Product Description

  A fully sealed oil-immersed amorphous alloy transformer is a type of fully sealed oil-immersed power transformer that uses amorphous alloy iron core as its material. It is an ideal energy-efficient and environmentally friendly electrical product, meeting the requirements of the "China Energy-Saving Technology Outline" issued by the State Economic Commission and the State Planning Commission. It has been widely used in domestic and foreign power grids for nearly two decades. The SBH15-M series products meet the national standards GBI094 "Power Transformers" and JB/T10318—2002 "Technical Parameters and Requirements for Oil-Immersed Amorphous Alloy Iron Core Distribution Transformers". Amorphous alloy iron core transformers are new energy-saving and environmentally friendly products. The core is made of wound amorphous alloy strips, and the no-load loss is only 20-25% of that of S9 distribution transformers.
 
SBH15 Fully Sealed Oil-Immersed Amorphous Alloy Distribution Transformer Parameter Table
 
 SBH15 Fully Sealed Oil-Immersed Amorphous Alloy Transformer
 
Structural Features
  Amorphous alloy is a new type of strip material. Amorphous alloy materials do not have a crystal structure, have low magnetization power, and high resistivity, so the eddy current loss is small. Using this material to make the core can produce a new type of energy-saving transformer, which is an ideal product for the upgrading of distribution networks.
  The core is a wound core structure, three-phase five-column type, with a rectangular cross-section.
  The coil is rectangular. The high-voltage coil is wound with acetal resin-coated wire, and the low-voltage coil uses oxygen-free copper wire or copper foil coil to increase the transformer's short-circuit withstand capability.
  The transformer connection group adopts Dyn11, avoiding the influence of high-order harmonics, has strong unbalanced load capacity, and significantly improves power supply quality.
The transformer uses vacuum oil injection to remove air bubbles in the coil and ensure stable insulation performance.
  The oil reservoir is eliminated, and the plate-type radiator replaces the oil pipe as the cooling component. There is an air cushion on the top of the oil tank, which can be compressed with the volume of the transformer oil. The transformer oil is insulated from the atmosphere, preventing and slowing down the deterioration of the oil quality and moisture absorption of the insulation, enhancing the possibility of operation, and requiring no maintenance during normal operation.
 
 
 

Product inquiry

Filling in your phone and email information will help us to contact you in a timely manner and solve your problems as soon as possible.

Submit

Business License