News

Jiangsu Xinxin Electric Co., Ltd.

Dry-type transformer price-dry-type transformer selection.


Release time:

2022-10-19

The safe operation and service life of dry-type transformers depend to a large extent on the safety and reliability of transformer winding insulation. When the winding temperature exceeds the insulation withstand temperature, the transformer cannot work normally, causing insulation damage, which is one of the main reasons. Therefore, the monitoring of transformer operating environment temperature and its alarm system control is very important.

Dry-type transformer price-dry-type transformer selection.

Dry-type transformer price-temperature control system

The safe operation and service life of dry-type transformers depend to a large extent on the safety and reliability of transformer winding insulation. When the winding temperature exceeds the insulation withstand temperature, the transformer cannot work normally, causing insulation damage, which is one of the main reasons. Therefore, the monitoring of transformer operating environment temperature and its alarm system control is very important.

(1) Automatic fan control: The temperature signal is measured by the Pt100 thermistor temperature measurement resistor embedded in the hot part of the low voltage winding. The transformer load can be increased and the working environment temperature increased. When the winding temperature reaches 110°C, the system automatically starts the fan cooling, and when the winding temperature reaches 90°C, the system automatically stops the fan operation.

(2) over-temperature alarm and trip: the temperature control signal of winding or iron core can be collected through the PTC nonlinear thermal resistance data embedded in the low-voltage winding. If the transformer winding temperature continues to rise to 155 ℃, the system outputs an over-temperature alarm signal; if the temperature continues to rise to 170 ℃, the transformer cannot continue to work; send an over-temperature trip signal to the secondary protection circuit to quickly trip the transformer.

(3) Temperature data display information system: Pt100 thermistor embedded in the low-voltage winding through the network to measure the working temperature and environmental changes, and the direct result shows the temperature of each phase winding. The temperature is output from 4 ~ 20mA analog quantity, if it needs to be transmitted to a remote computer (distance up to 1200m).

Dry-type transformer price-protection method

IP20 protective shell is usually used to prevent physical foreign bodies with a diameter of more than 12mm and small animals such as mice, snakes, cats, sparrows, etc. from entering, causing short circuits, power outages and other malignant faults, providing safety guarantee. Barriers for live working parts. If a transformer is designed to be installed outdoors, an IP23 protective equipment enclosure can be selected. In addition to the above IP20 protection, it can also prevent water droplets at an angle of 60 ° to the vertical. However, the IP23 shell will reduce the cooling technology capacity of the transformer, so pay attention to the enterprise to reduce its operation and management capacity when making the choice.

Overload capacity

The overload capacity of dry-type transformer is related to the ambient temperature, the load before overload (initial load), the insulation and heat dissipation of the transformer, and the heating time constant. If necessary, the overload curve type transformer can be obtained from the manufacturer.

How to use its overload capability?

When choosing to calculate and analyze the transformer capacity, it can be appropriately reduced: fully develop and consider the possibility of short-term economic impact overload of some steel rolling, welding and other equipment enterprises of students-try to reduce the transformer capacity with strong overload capacity of dry-type transformers; Place with uniform load, such as residential areas with night lighting, cultural life and entertainment service facilities, and shopping malls with air conditioning and daytime lighting, can make full use of its overload protection capability, appropriately and effectively reduce the transformer capacity, so that the main market operation management time in full load or short-term overload.

Application Status

Dry-type transformer oil-free, no fire, explosion, pollution and other problems. Therefore, electrical design codes and regulations do not require dry-type transformers to be placed in a separate room. Losses and noise are reduced to a new level, creating conditions for placing transformers and low voltage panels in the same distribution room.



Key words:



Business License