Transformer manufacturers: the role of dry-type transformers
Release time:
2021-05-06
Dry-type transformer is developed by using the principle of electromagnetic induction and referring to the parameters of the new CNC servo system. It is manufactured by advanced technology and rigorous design, and preferably foreign advanced terminal blocks. It has excellent performance, reliable operation, low energy consumption, and small size., Safe wiring, wide applicability and so on. Let's follow Xiao Bian to see below!
Dry-type transformer is developed by using the principle of electromagnetic induction and referring to the parameters of the new CNC servo system. It is manufactured by advanced technology and rigorous design, and preferably foreign advanced terminal blocks. It has excellent performance, reliable operation, low energy consumption, and small size., Safe wiring, wide applicability and so on. Let's follow Xiao Bian to see below!
1. The altitude is not more than 2500m;
2. Ambient air temperature: high not more than 40 ℃, low not less than -25 ℃;
3. Air relative humidity: the average relative humidity of the wet month is 90%;
4, no violent vibration and impulse place;
5, in the medium without explosion hazard, and the medium is not enough to corrode the metal and damage the insulation of the gas and conductive dust.
6. Places free from rain and snow.
7. The power supply voltage waveform is similar to a sine wave.
Generally, there are two types of secondary windings in addition to the primary winding. One is the "lighting winding" for the power supply voltage required for local lighting; the other is the "control winding" used to supply the power supply voltage required for machine tool control appliances. If the same transformer has two windings of "control" and "lighting", the two windings are independent windings wound separately. One end of the lighting winding is grounded, and some even use the tap to draw 6.3V voltage from the secondary "control winding" to supply the signal indicator for use.
1. Before purchasing, first estimate the total capacity of the electrical appliances you use, and select a transformer with a considerable capacity to ensure that the transformer does not burn out when starting instantaneously.
2. When you use a transformer with multiple windings (multiple output voltages), you must specify the capacity allocation of each winding and keep the margin to avoid damage to the transformer due to overload.
3. Before installation, you should carefully check whether the data listed on the nameplate meet your requirements, and only after confirmation can you install and use it.
4, after the power work, the transformer core and coil will heat (but the temperature rise is not more than 80 ℃) is a normal phenomenon, if the temperature rise of more than 80 ℃, or even smoke, you should cut off the power switch, re-check your electrical capacity.
5. During transportation, collision should be avoided as much as possible, and do not be affected with moisture. When using, please pay attention to maintenance to protect the service life of the transformer.
Key words:
Mobile Website
Sales Hotline
+86 13852525108
Contact: Mr. Zhan
Telephone: +86-514-85811000
E-mail: xxdq@jsxxdq.com
Address: No. 6-6 Kangmin Road, Yizheng City, Yangzhou City, Jiangsu Province