Step-up process of dry-type transformer
Release time:
2021-06-16
Common dry-type transformer is an important power equipment, and the voltage is constantly adjusted. However, due to certain needs, dry-type transformers are also boosted, and the boosting process is more complicated, and the principle is more. We still and dry-type transformer manufacturers to understand the specific principle of dry-type transformer boost:
Common dry-type transformer is an important power equipment, and the voltage is constantly adjusted. However, due to certain needs, dry-type transformers are also boosted, and the boosting process is more complicated, and the principle is more. We still and dry-type transformer manufacturers to understand the specific principle of dry-type transformer boost:
Dry-type transformer is a common electrical equipment, which can be used to transform an alternating voltage of a certain value into an alternating voltage of another value with the same frequency. Step-up dry-type transformer is used to convert a low-value alternating voltage into another high-value alternating voltage of the same frequency. It is widely used in the field of high frequency, such as inverter power supply.
Step-up dry-type transformer refers to the instantaneous start of the voltage. At present, there are relatively few dry-type transformer manufacturers that can effectively achieve instantaneous step-up. The step-up dry-type transformer has relatively strong instantaneous start-up boost capability and good boost effect. The difference is that the non-excitation voltage regulating switch does not have the ability to switch gears with load, because this tap changer has a short-term disconnection process in the process of switching gears, and disconnection of the load current will cause arc between contacts to burn out the tap changer or short circuit, so the dry-type transformer should be powered off during gear shifting. Therefore, it is generally used for dry-type transformers that are not very strict about voltage requirements and do not require frequent shifting.
Principle of step-up dry-type transformer: Step-up dry-type transformer is a device that transforms low AC voltage, high current, and small impedance into high AC voltage, small current and large impedance. When AC current is passed through the primary coil, the iron core (Or the magnetic core) generates AC magnetic flux, so that voltage (or current) is induced in the secondary coil.
The input of a dry-type transformer is an alternating power source, and its output voltage is proportional to the turns ratio of the output and input coils. If a battery is used, because it is DC, a switching circuit is added to the input circuit to turn it into a constantly changing voltage. In this way, alternating high-voltage electricity can be obtained at the output end.
The above is the principle of dry-type transformer boost introduction for your reference, for dry-type transformer boost process do you have any specific understanding, please contact our technical personnel for exchange and communication! In short, the step-up of dry-type transformer is more critical, and we will continue to pay attention to it in the future.
Key words:
Mobile Website
Sales Hotline
+86 13852525108
Contact: Mr. Zhan
Telephone: +86-514-85811000
E-mail: xxdq@jsxxdq.com
Address: No. 6-6 Kangmin Road, Yizheng City, Yangzhou City, Jiangsu Province