News

Jiangsu Xinxin Electric Co., Ltd.

Power transformer manufacturers: tell you how to solve the power transformer fault


Release time:

2021-06-05

Power transformer is a kind of static electrical equipment, which is used to change a certain value of AC voltage (current) into another or several different values of voltage (current) with the same frequency. When the primary winding is supplied with alternating current, an alternating magnetic flux is generated. The alternating magnetic flux passes through the magnetic conduction of the iron core, and the AC electromotive force is induced in the secondary winding.


Power transformer is a kind of static electrical equipment, which is used to change a certain value of AC voltage (current) into another or several different values of voltage (current) with the same frequency. When the primary winding is supplied with alternating current, an alternating magnetic flux is generated. The alternating magnetic flux passes through the magnetic conduction of the iron core, and the AC electromotive force is induced in the secondary winding.

how to solve the power transformer fault:

1. Oil leakage at welding

The main reason is that the welding quality is poor, there are defects such as virtual welding, desoldering, pinholes and sand holes in the welding seam. When the power transformer leaves the factory, hidden dangers will be exposed after operation due to the coverage of welding flux and paint. In addition, electromagnetic vibration will cause welding vibration cracking and leakage. For the leakage phenomenon has occurred, first find out the leakage point, can not be missed. For serious leakage parts, metal tools such as flat shovel or sharp punch can be used to rivet the leakage point. After controlling the leakage, the surface will be cleaned up. Most of them are cured by polymer composite materials. After curing, the purpose of long-term leakage control can be achieved.

2. Seals leak oil

The reason for poor sealing is that the sealing between the box edge and the box cover is usually sealed by oil-resistant rubber rods or rubber pads. If the joints are not handled properly, oil leakage will occur. Some are bound with plastic tape, and some directly press the two ends together. Due to rolling during installation, the interface cannot be pressed firmly, which cannot play a sealing role and still leaks oil. Fushi blue material can be used for bonding, so that the joint is formed as a whole, and the oil leakage phenomenon is greatly controlled. If the operation is convenient, the metal shell can also be bonded at the same time to achieve the purpose of leakage control.

3. Oil leakage at flange connection

The flange surface is uneven, the fastening bolts are loose, and the installation process is incorrect, so that the bolts are not fastened well and cause oil leakage. After tightening the loose bolts, the flange is sealed and the bolts that may leak are also treated to achieve the purpose of complete treatment. The loose bolts shall be tightened in strict accordance with the operation process.

Key words:



Business License