News

Jiangsu Xinxin Electric Co., Ltd.

Transformer manufacturers tell you how to judge the transformer failure


Release time:

2021-07-17

In fact, the sound of the transformer can also be seen whether there is any damage to the transformer. If there are several problems in the sound, it means that the transformer has failed and needs to be repaired. These sound problems when the common transformer is in operation indicate that your transformer is broken. Let's take a look at it in detail:

How to judge the transformer failure

In fact, the sound of the transformer can also be seen whether there is any damage to the transformer. If there are several problems in the sound, it means that the transformer has failed and needs to be repaired. These sound problems when the common transformer is in operation indicate that your transformer is broken. Let's take a look at it in detail:

The transformer is murmur. If the sound of the transformer is more normal and there is noise, but the current and voltage are not abnormal, it may be caused by the loosening of the clamp or the screw pressing the iron core, which makes the silicon steel sheet vibrate.

The transformer has a sound discharge. If partial discharge occurs on the transformer or surface, the sound will be mixed with "crackling" discharge sound. When this happens, if blue corona or sparks can be seen near the transformer bushing at night or in rainy weather, it indicates that the porcelain is seriously polluted or the equipment clamp is in contact. If the transformer is discharged, it is the electrostatic discharge of ungrounded components or the contact discharge of tap changer, then the transformer should be further tested or stopped.

The transformer has the sound of water boiling. If the sound of the transformer is mixed with the sound of water boiling and the temperature changes, and the oil level rises, it should be judged that the transformer winding has a short circuit fault, or the tap changer is seriously overheated due to contact. At this time, the transformer should be stopped for inspection.

There's a popping sound from the transformer. If the sound of the transformer is mixed with uneven cracking sound, it is the transformer or surface insulation breakdown, at this time the transformer should be shut down for inspection.








 

Key words:



Business License