News

Jiangsu Xinxin Electric Co., Ltd.

Use dry-type transformer should pay attention to what


Release time:

2021-12-28

The use of dry-type transformers has always been to pay attention to, slightly not paying attention to it may present problems, the use of dry-type transformers to fit the fundamental characteristics of electricity, but also have the guarantee of relevant technology, usually pay attention to the details of the use, otherwise the dry-type transformer will present a variety of problems, it will seriously affect the efficiency of the use. So what problems should be paid attention to when the dry type transformer stops using?

The use of dry-type transformers has always been to pay attention to, slightly not paying attention to it may present problems, the use of dry-type transformers to fit the fundamental characteristics of electricity, but also have the guarantee of relevant technology, usually pay attention to the details of the use, otherwise the dry-type transformer will present a variety of problems, it will seriously affect the efficiency of the use. So what problems should be paid attention to when the dry type transformer stops using?

 

Pay attention to the use of dry-type transformers in the environmental system industry is one of the most used transformers. Dry-type transformers have good fire protection performance and are mostly used in places with high fire protection requirements, such as hospitals, airports, stations and other places, but the price is higher. There are also certain requests for the environment, such as not being too wet, not too much dust and filth.

And should prevent the work in the corrosive liquid, or gas, dust, conductive fiber or metal fines more places, the use should also prevent rain, moisture, high temperature, high heat or direct sunshine. Pay attention to the connection mode. The input and output three-phase power lines of dry-type transformer shall be connected to phase A, phase B and phase C respectively according to the bus color yellow, green and red of dry-type transformer wiring board. The zero line shall be connected to the neutral zero line of dry-type transformer.

The grounding wire, transformer shell and transformer center point shall be connected. Check the input and output lines to make sure they are correct. The application should first no-load power-on, check the test input and output voltage fit request. At the same time, check whether there are abnormal phenomena such as abnormal sound, ignition and peculiar smell inside the machine. If there is any abnormality, please disconnect the input power immediately. Immediately check the wiring mode, if there is any error, immediately correct the no-load power-on again until there is no abnormality before it can be put into operation.

Key words:



Business License