News

Jiangsu Xinxin Electric Co., Ltd.

Dry type transformer price: what is the difference between dry type transformer and oil immersed transformer?


Release time:

2022-08-30

Dry type transformer price: what is the difference between dry type transformer and oil immersed transformer? In daily life, the use of dry-type transformers is still relatively extensive, and the current use of transformers in factories is still relatively large. Then the price of dry-type transformers: What is the difference between dry-type transformers and oil-immersed transformers?

dry type transformer price: what is the difference between dry type transformer and oil immersed transformer?

In daily life, the use of dry-type transformers is still relatively extensive, and the current use of transformers in factories is still relatively large. Then the price of dry-type transformers: What is the difference between dry-type transformers and oil-immersed transformers?

dry type transformer price: what is the difference between dry type transformer and oil immersed transformer?

1. There are different packaging forms. Dry-type transformers can directly see the iron core and coil, while oil-immersed transformers can only see the transformer shell;

2. Different forms of sales leads dry-type transformers use silicone rubber casing, oil-immersed transformers use porcelain casing;

3. Different capacity and voltage dry-type transformers are generally suitable for power distribution, the capacity is mostly below 2000kVA, the voltage is below 10kV, and some can reach the voltage level of 35kV. Oil immersed transformer can reach all the required capacity, voltage level can reach all the voltage. The UHV 1000 kV lines under construction in China use oil-immersed transformers.

4. Insulation and heat dissipation are different. Dry-type transformers generally use resin insulation, natural air cooling, large-capacity fan cooling. Oil-immersed transformers are insulated by insulating oil, and the heat generated by the coil is transferred to the radiator (chip) of the transformer through the circulation of insulating oil inside the transformer.

5. Applicable places Dry-type transformers are mostly used in places that require "fire and explosion prevention" and are generally applicable to large buildings and high-rise buildings. However, oil-immersed transformers are mostly used in places where fires are caused by oil gushing or leakage after "accidents.

6. The load bearing capacity is different. In general, dry-type transformers should operate at rated capacity, while oil-immersed transformers have better overload capacity.

7. The cost is different. The same capacity of the transformer, dry-type transformer purchase price is much higher than the oil-immersed transformer.

dry type transformer price: what are the common causes of dry type transformer oil leakage?

1. The oil leakage at the welding place is mainly due to poor welding quality, false welding, desoldering, pinhole, sand hole, etc. When the power dry-type transformer leaves the factory, due to the coverage of flux and paint, safety hazards will be exposed after operation. In addition, due to electromagnetic vibration, welding will crack, resulting in leakage. For the leakage phenomenon, first find out the leakage point, do not miss. For the leakage of serious parts, the use of spatula or punch and other metal tools riveting leakage point. After controlling the leakage, the treated surface will be cleaned. Most of them are cured with polymer composite materials, which can be cured for a long time. The purpose of controlling leakage.

2. The reason why the sealing oil leaks and the sealing is not good: usually use oil-resistant rubber rods or rubber pads to seal the edges and lids of the box. If the joint is not handled properly, it will cause oil leakage. Some are tied with plastic tape, and some are directly pressed together. Due to rolling during installation, the interface cannot be sealed too tightly and is still leaking. Blue forsythia material can be used for bonding to make the joint complete and greatly control the oil leakage; if the operation is convenient, the metal shell can be bonded at the same time to control the leakage.

When tightening the bolts, strictly follow the operating procedures.

3. radiator oil leakage. The radiator tube of the radiator is generally stamped with a slotted steel pipe.

Key words:



Business License